Household Ventilation

There is a renewed need for mechanical filtration in our homes, as the technology that has become part of the house helps to work more efficiently, leading to a need for maintain air quality in much tighter quarters. This need is very significant, as the American Lung Association has compiled a list of correlations between asthma and lung health issues and the tightening of our homes and introduction of new chemistries to our indoor space. This one-two combo of new and increased pollutants and the smaller enclosures has led to the only possible solution; one must do what is needed to ensure that the air in our homes is fresh and pollutant free.

What is in our air?

It can be hard to fathom, but the air around us contains particulates. Some particulates you can see, for example those within a sunbeam, but most you are unable to see. Those we cannot see are the worst kind, such as VOCs. These threats are the most harmful.

The solution is to design and install a ventilation system. The system should filter air for all areas of the home, and the system must meet ASHREA standard 62-02. This states that the air movement should be 7.5 cubic feet a minute per bedroom plus and additional 0.01 CFM per square foot. A good rule of thumb is to have around 50 CFM for a 1900 square foot, average home. There are two principle design strategies to designing the ventilation system – exhaust and supply systems and air to air heat recover systems.

Exhaust and Supply Systems –

This system’s primary mechanism is the placement of an exhaust fan, typically on the second floor. This fan runs quietly either on a low speed continuous or high speed intermittent. This fans placement may allow it to piggy back other parts of the system, but over all the system uses the exhaust fan to take out fresh air for the inlet. The entire system can be modified by removing the exhaust fan and letting the air handler draw in fresh air. The cost of this system is between $400 and $1000, which is heavily dependent on the equipment used.

Air to Air Heat Recovery Systems –

This is a more expensive alternative that recovers some of its energy during its operation. The basic mechanism is that the exhaust passes by the incoming fresh air giving some of its heat (or cold) to the incoming air. These systems also have airflow adjustment to allow the system to work during exhaust. The price for the system can be from $1,800 and $2,500, again heavily dependent on the equipment utilized.

It is important to ensure that your home is free of airborne particles. Choose a high quality filter and a system designed for the needs of you home to ensure that the airborne pollutants are kept to a minimum. This is a necessary element to ensuring the respiratory health of you and your guests.

Photo Credits: 1

Originally posted 2009-01-30 05:41:40. Republished by Blog Post Promoter

Blog Traffic Exchange Related Posts
  • insulated-vinyl-sidingInsulated Vinyl Siding's Green Performance Documented in New Study Recent studies that have been sponsored on the behalf of NYSERDA, insulated vinyl siding has demonstrated that it contributes to energy consumption savings as well as savings in CO2 emissions and energy costs, which means that insulated vinyl siding is capable of outperforming fiber cement when these environmental measures and......
  • highSensible and Cost Effective Green Building Green construction has to be neither cost prohibitive or complicated, according to experts at the Pacific Coast Builders Conference. According to these experts, building homes that are green and energy efficient does not have to be rocket science at all, but rather you can build a very efficient home at......
  • asbestos_house_diagramHealthy Green Alternatives Push Asbestos Out of the Home Today's article is written by Joe Lederman, an Awareness Coordinator at the Mesothelioma Cancer Center. When purchasing or remodeling a home or building, there are many variables to consider. Homes which were built prior to 1980 have a strong likelihood of containing asbestos materials. Asbestos is a fibrous mineral that......
  • thumbTaking DIY Disasters into Your Own Hands Watching home improvement television may inspire you to tackle your own home renovation projects, but just as quickly as you found the inspiration to get started, you will find yourself getting over your head. Every year, millions of Americans are tackling their own home remodeling projects, both large and small.......
  • resourcesCounting Down to Quality There are five common errors that builders make in the efficiency of energy, resources and health. There are far too many green builders out there that are completely missing the mark. There are five mistakes that are being perpetrated, but that you can avoid easily with the right know-how. #5:......
Online Stores
carbon footprint cleaning product climate clothes line clothes tree compact fluorescent light compact fluorescent light bulbs construction buildings construction materials ecological harmony efficient design electric clothes dryer energy options energy use environmental degradation fluorescent light bulbs green architecture Green Construction green energy heat island heat sources home renovation projects human health hydro electric energy incandescent light bulbs lighting fixtures lint trap low impact man made resources natural construction natural environments natural materials operation maintenance plain water power sources site selection solar farms solar panels storm water sustainable buildings sustainable design ventilation system water and heat water energy white vinegar