Entries Tagged 'Home' ↓
July 23rd, 2010 — Green Construction, Home
There are five common errors that builders make in the efficiency of energy, resources and health. There are far too many green builders out there that are completely missing the mark. There are five mistakes that are being perpetrated, but that you can avoid easily with the right know-how.
#5: Installing HVAC Ducts in Unconditioned Spaces
HVAC ducts should be installed in better locations, such as between the floors or in dropped soffits that are positioned within conditioned areas inside the home. This way, the conditioned air will always travel though the ducts at the room temperature. Some builders that are thinking ahead are making sure to condition the attic, placing insulation in the roof deck rather than in the ceiling to bring down attic temperatures which is a step in the right direction.
#4: Tight Homes Build without Any Ventilation
You should be installing a complete house ventilation system as standard equipment within a home in order to provide plenty of fresh air in a home that is air tight. The solution is always to design a home with fresh air in mind. A whole house ventilation system should be installed and then tested for performance. The ventilation system should make sure that the house is bringing in as well as dispersing 50 CFM worth of fresh air for a period of 15 or 20 minutes every hour or so for the best results.
#3: Using Improper Flashing and Improper Drainage Planes
When it comes to managing water, using improper drainage planes and flashing is a rookie mistake. It becomes important, then, to pay extremely close attention to flashing on windows, sealing penetrations and where the water coming off of your roof is ending up. There is very little room available for flexibility. You need to be prepared to pain flash doors and windows in every type of climate for the best results. You also want to flash any and all penetrations using a weather resistant barriers, and kick flashing, complex connections and gutters should all be properly flashed and drained using intentional paths for water, slopes and shingling.
#2: Selecting and Installing the Wrong Insulation
We only get one single shot when it comes to properly insulating our homes as well as air sealing them, and this is not a place where we should be scrimping. It is vitally important, then, that we choose the right type of insulation, such as a sturdy blown-in type of insulation that can fill walls as compactly and as tightly as possible. All penetrations in the attic, garage and leading outdoors should be sealed to get the most out of your insulation. The right sealing with the right insulation will mean cheaper heating and cooling costs as well as improved customer satisfaction at the same time.
#1: Wasting Resources
You probably do not need as much stuff as you once thought. The building industry often uses too many resources, wasting them. What are you throwing away that could be reused? There is nothing more effective in green building than reusing everything that you can. There are always ways to be more profitable, greener and infinitely more effective just by using less. If you plan ahead and really take a hard look at what you're looking at, you can find ways to streamline the building process, wasting fewer resources in the process.
Photo Credits: billjacobus1
Originally posted 2009-07-24 05:22:03. Republished by Blog Post Promoter
Related Posts -
The Truth of Green Product Claims If you are confused when it comes to green building products and the claims that are being made by their manufacturers, you are not the only one. Navigating the complex world behind green products and the claims that they make is not always easy, but it has become necessary in...... -
Understanding the Vapor Barrier The first thing to understand is that there is a difference between vapor barriers and what air barriers are. When properly defined, a vapor barrier alone is not capable of controlling the movement of air, but rather it is responsible for controlling the movement of moisture. Vapor barriers are not...... -
Quick and Easy Steps to Green Remodeling For a lot of home remodelers, the idea of going green can be absolutely overwhelming. Luckily, there is a wealth of information out there, and just because you are not already implementing these ideas, that does not mean you're too far behind to make some leeway. According to leading remodelers...... -
Taking DIY Disasters into Your Own Hands Watching home improvement television may inspire you to tackle your own home renovation projects, but just as quickly as you found the inspiration to get started, you will find yourself getting over your head. Every year, millions of Americans are tackling their own home remodeling projects, both large and small....... -
Insulated Vinyl Siding's Green Performance Documented in New Study Recent studies that have been sponsored on the behalf of NYSERDA, insulated vinyl siding has demonstrated that it contributes to energy consumption savings as well as savings in CO2 emissions and energy costs, which means that insulated vinyl siding is capable of outperforming fiber cement when these environmental measures and......
Online Stores
July 22nd, 2010 — Going Green Tips, Green Construction, Home
Green construction has to be neither cost prohibitive or complicated, according to experts at the Pacific Coast Builders Conference. According to these experts, building homes that are green and energy efficient does not have to be rocket science at all, but rather you can build a very efficient home at a very low cost. The following is a collection of building practices that are attainable and sustainable that can help you make your building projects greener without requiring a lot of money.
Energy Efficiency -
In most green building certification programs, energy efficiency plays a very large role. Consumers want homes that offer reduced costs of operation. Begin by building the home to require less air conditioning in the first place, and make sure that the air conditioning unit is charged properly otherwise the system's SEER may drop out. When installing insulation, make sure to use the thermal bypass checklist by Energy Star, which shows common insulation installation mistakes and how they can be avoided. The most cost effective features for saving energy tend to vary based on the climate for your local, for example tankless water heaters are excellent for climates like San Diego where you do not need much heat or air conditioning.
Durability -
Install backer board that is resistant to moisture, such as DensShield Tile Backer by Georgia Pacific, because standard gypsum board is an excellent breeding ground for mold, which needs to be avoided. Concentrating on the initial design is the best way to provide the biggest bang for the amount of money that you are spending. Another thing worth implementing is to avoid roof pitches that intersect with vertical wall planes, because this can cause problems relating to moisture management. Remember the basics when it comes to durability, most of all. One tip that was recommended was to avoid reverse shingling house wrap, which can cause enormous problems in the long run.
Water Efficiency -
Aim to install high efficiency fixtures and appliances, as high efficiency dishwashers can use only 5 to 7 gallons of water per load rather than 12 gallons for example. Other high efficiency fixtures are also useful, such as toilets, showers, washing machines and faucets, many of which can provide savings of up to 50%. You should also work to install water conserving landscaping, avoiding invasive species and only using low flow irrigation systems, drip and bubbler systems along with smart irrigation controllers for the best results.
Resource Conservation -
You should avoid using plants in your landscaping that require a lot of shearing, because green waste like this can take up a lot of space in local landfills. Instead, include a built in recycling center so that recycling can be made easier for homeowners.
There are many building practices that can create greener homes without requiring much more money in the process.
Photo Credits: 1
Originally posted 2009-02-04 05:50:39. Republished by Blog Post Promoter
Related Posts -
Using a Pipe Threader A pipe threader is a piece of equipment that allows you to cut threads in the end of a pipe. It's a piece of equipment that uses dies that you can change out for different sizes to grind threads in the ends of different sizes of pipes. If you use...... -
Green Home Makeovers that are Easy and Affordable Are you looking to save the environment, but you cannot afford costly options like solar panels? Are you looking for a way to cut down on your energy costs, but are not all together sure about installing wind turbines in your back yard? Don't worry! There are plenty of things...... -
Household Ventilation There is a renewed need for mechanical filtration in our homes, as the technology that has become part of the house helps to work more efficiently, leading to a need for maintain air quality in much tighter quarters. This need is very significant, as the American Lung Association has compiled...... - Taking DIY Disasters into Your Own Hands Watching home improvement television may inspire you to tackle your own home renovation projects, but just as quickly as you found the inspiration to get started, you will find yourself getting over your head. Every year, millions of Americans are tackling their own home remodeling projects, both large and small.......
-
M Brace Raised Bed Gardening If you’ve ever wanted try raised beds, either to extend your gardening season or because you have limited garden space, now you can do so without having to spend hours building a bed. The M Brace makes it easy for anyone to create a stunning raised bed for gardening.......
Online Stores
July 21st, 2010 — Going Green Tips, Green Construction, Home
For a lot of home remodelers, the idea of going green can be absolutely overwhelming. Luckily, there is a wealth of information out there, and just because you are not already implementing these ideas, that does not mean you're too far behind to make some leeway. According to leading remodelers in the industry, the best way to handle green remodeling is not to allow yourself to become swamped, as long as you take things one step at a time. Do not try to take everything on at once, but rather, pick one or two things to green up your projects and go from there. You do not have to go to the extreme in order to have a green remodel. Keep these small and quick tips in mind and you can green up your remodeling project without overwhelming yourself in the process.
Low-E Windows filled with Aragon Gas -
You may not immediately think of it, but one of the easiest ways that you can go green is through the use of these windows. They allow you to significantly reduce heat gain because they reflect light during the summer months, and they help to keep heat inside during the winter months as well. If you make these windows your standard replacement windows, you can actually save money for homeowners and can reduce their reliance on artificial heating sources that produce harmful greenhouse gasses.
High Efficiency Furnaces -
Another area that you can easily sell to homeowners is high efficiency furnaces because of the energy payback. If a homeowner has to replace a furnace anyway, why not pay a little bit more if it means getting significant savings in return? Because utility bills are continuing to go up, anything that cuts the use of energy in the home is usually a big seller with homeowners who are looking to remodel.
Paints and Finishes with Low-VOC Ratings -
This one will cost more rather than saving any money for the homeowner, but it is all about improving their general comfort and health instead. These paints do not have any volatile organic compounds in them, preventing home owners from having negative reactions to them.
Dual Flush Toilets -
These are toilets that offer two flushing options; one for liquid waste and one for solid, and they use the bare minimum of water required for each, saving the homeowner a significant amount of money in the process. They offer significant savings over toilets from earlier than 1992, going from the standard of 5 gallons per flush to 0.8 to 1.6 gallons for liquid and solid waste respectively.
Low Flow Fixtures -
There are many faucets and showerheads that exist to reduce water, offering a savings of as much as 25 to 60 percent.
Reconfigure First -
Can you find a way to offer what the homeowner is looking for without requiring additional space? Sometimes the clients believe that they want more space, but really all they require is a space that is more efficiently designed. Smaller homes can use fewer materials and will require much less energy for heating and cooling.
Purchasing Locally -
Increasing how much you buy locally will significantly reduce your impact on the environment, even without changing anything else. One of the biggest ways that a product has an affect on the environment is the transportation of those materials across the state, country or even across the world.
Photo Credits: 1
Originally posted 2009-02-02 05:46:09. Republished by Blog Post Promoter
Related Posts - Household Ventilation There is a renewed need for mechanical filtration in our homes, as the technology that has become part of the house helps to work more efficiently, leading to a need for maintain air quality in much tighter quarters. This need is very significant, as the American Lung Association has compiled......
-
What's the Purpose of a Concrete Stamp A concrete stamp gives poured concrete the appearance of almost any type of surface you can imagine will from cobblestone to brick to wood, depending on the design of the stamp. A sidewalk, patio or driveway can be poured and made to look like something else with a concrete stamp....... -
Green Building Materials Green Construction is the practice of building in a way that increases efficiency of the use of materials like energy, water and other materials and resources while reducing the impact on human health and the environment during the process of building through more efficient design, site selection, construction, operation, maintenance...... - Taking DIY Disasters into Your Own Hands Watching home improvement television may inspire you to tackle your own home renovation projects, but just as quickly as you found the inspiration to get started, you will find yourself getting over your head. Every year, millions of Americans are tackling their own home remodeling projects, both large and small.......
- Insulated Vinyl Siding's Green Performance Documented in New Study Recent studies that have been sponsored on the behalf of NYSERDA, insulated vinyl siding has demonstrated that it contributes to energy consumption savings as well as savings in CO2 emissions and energy costs, which means that insulated vinyl siding is capable of outperforming fiber cement when these environmental measures and......
Online Stores
July 20th, 2010 — Going Green Tips, Green Construction, Home
Are you looking to save the environment, but you cannot afford costly options like solar panels? Are you looking for a way to cut down on your energy costs, but are not all together sure about installing wind turbines in your back yard? Don't worry! There are plenty of things that you can do to go green that are easy and affordable, allowing you to make big changes while staying within your budget.
Here are some basic green living tips that will allow you to stay within your budget while conducting eco friendly home and yard makeovers for greener living.
Start by performing a home energy audit, checking to see first if your local utilities do this kind of service or finding another service that may. The auditor needs to make a complete inventory of all of the appliances in your home that use electricity or water. Performing an energy audit is an excellent way to find out how efficient or how inefficient your appliances are, and if there are any ways that you can make your heating or cooling systems more efficient.
You should aim to replace any incandescent light bulbs in your home with more efficient CFL or Compact Fluorescent Light Bulbs, as these will last longer and will utilize less power in the process.
Some modern shower systems spew out an incredibly wasteful amount of water, at approximately 80 gallons of water per minute. By using a water-saving shower head, you can reduce this to 1.75 gallons per minute instead, saving thousands of gallons a year!
Composting toilets are capable of turning human waste into natural fertilizer, and they are an excellent way to conserve water use. However, this is a pretty large step for many people. There is no shortage of other ideas to consider when it comes to going green in the bathroom. Consider using chlorine free, recycled toilet paper, organic cotton bath towels and other linens, and even a shower curtain that is free of PVC.
Your home carpet is a magnet for many things, like toxins, animal dander, fungi, dust, dirt and bugs. Not only is your carpet a reservoir of dirt and other nastiness, but it was probably also made from a petrochemical synthetic material like nylon for example. Instead, choose area rugs that are made from natural fibers, and choose rugs that are stitched rather than glued.
Rather than drowning your lawn in dangerous chemicals and pesticides, you can make your own weed and bug repellent using water and hot peppers. Take out the grass, which soaks up water like a sponge, and replace your lawn with rocks, wild flowers, gravel and other native plants; these are all elements that do not require fertilizer or lawn, which saves you on chemicals and on water.
There are plenty of other things that you can do to significantly reduce your carbon footprint, saving on money in your utility bills at the same time.
Bonus Tip: Another handy post-makeover tip is to hire a junk removal service. Companies like this will haul away all your leftover debris and rubble from any project, from basement finishing to new flooring in the kitchen.
Photo Credits: 1
Originally posted 2009-01-23 05:05:51. Republished by Blog Post Promoter
Related Posts - Insulated Vinyl Siding's Green Performance Documented in New Study Recent studies that have been sponsored on the behalf of NYSERDA, insulated vinyl siding has demonstrated that it contributes to energy consumption savings as well as savings in CO2 emissions and energy costs, which means that insulated vinyl siding is capable of outperforming fiber cement when these environmental measures and......
- Understanding the Vapor Barrier The first thing to understand is that there is a difference between vapor barriers and what air barriers are. When properly defined, a vapor barrier alone is not capable of controlling the movement of air, but rather it is responsible for controlling the movement of moisture. Vapor barriers are not......
-
Sensible and Cost Effective Green Building Green construction has to be neither cost prohibitive or complicated, according to experts at the Pacific Coast Builders Conference. According to these experts, building homes that are green and energy efficient does not have to be rocket science at all, but rather you can build a very efficient home at...... - Quick and Easy Steps to Green Remodeling For a lot of home remodelers, the idea of going green can be absolutely overwhelming. Luckily, there is a wealth of information out there, and just because you are not already implementing these ideas, that does not mean you're too far behind to make some leeway. According to leading remodelers......
- What's the Purpose of a Concrete Stamp A concrete stamp gives poured concrete the appearance of almost any type of surface you can imagine will from cobblestone to brick to wood, depending on the design of the stamp. A sidewalk, patio or driveway can be poured and made to look like something else with a concrete stamp.......
Online Stores
July 19th, 2010 — Air/Water, Green Construction, Home, Landscaping
In this current day and age, where common activities among people include the tightening of wallets and the fearing of soaring energy bills, almost everyone has had to adopt some substantial practices inside and outside of their own homes. Americans are also incorporating techniques in their landscaping that are allowing them to save on water and energy, according to a national study that was recently conducted on the subject of sustainability. Conducted on the behalf of a group called ALSA, or the American Society of Landscape Architects, as many as 96% of interviewed adults have adopted some kind of energy efficient or sustainable practices around the home such as installing energy saving CFL light bulbs, turning off lights or lowering the thermostat. Of those involved in the survey, it was also determined that as many as 58 percent were also using techniques to lower energy and water costs outdoors as well, including the planting of shade trees, the harvesting of rainwater and the recycling of water for plants and landscaping.
While there is still a gap between the indoors and outdoors, this is a gap that is quickly shrinking as more homeowners become more savvy to potentially energy saving techniques and practices that can be employed not only indoors, but also outdoors, such as blocking the solar heat gain or reducing their use of water. It is truly astonishing how much things have changed in the last five years or so. There are several different ways that gardeners, architects and building professionals can save energy and water in their actions, including:
1 - Employing landscape shading -
A home should be oriented so that it can absorb heat from the sun when it is cold, and can reduce solar heat gain when it is warm. Another way to achieve this concept is through strategic landscaping, by planting deciduous trees around 20 to 30 fees from the building on the eastern, southeastern and south sides of the building to help reduce solar gain during warmer summer months. These trees lose their leaves in the winter time, allowing solar gain during colder months of the year.
2 - Erecting Wind Breaks -
Windbreaks can reduce heating costs a great deal, and the benefits they offer increase significantly as these shrubs and trees mature. You should plant evergreen windbreaks on the northern edges of your home to keep cold winds from hitting your house.
3 - Control the heat island effect.
Pavement around your home is capable of radiating heat, increasing your summer cooling load, which is known as the heat island effect. By installing ground covers in place of pavement, you can significantly reduce the solar reflectivity as well as how much heat is going into the home. A great way to accomplish this is to install a large bush or a row of shrubs to shade a patio or a driveway, or using a hedge to shade a sidewalk, and a trellis which will allow climbing vines to shield a patio.
4 - Utilize native plants in order to conserve water.
Native plants can conserve more water than other plant options because they are better adapted to your local climate. By limiting your turf area, you can significantly minimize the needs for supplemental watering, which can significantly increase how much water you have to use to keep your plants healthy. Another option is to use mulch to reduce the evaporation in your landscape, and you should water or irrigate in the early morning when the rate of evaporation is lower for the best results.
Photo Credit: 1
Originally posted 2009-02-08 05:59:19. Republished by Blog Post Promoter
Related Posts - The Truth of Green Product Claims If you are confused when it comes to green building products and the claims that are being made by their manufacturers, you are not the only one. Navigating the complex world behind green products and the claims that they make is not always easy, but it has become necessary in......
-
Counting Down to Quality There are five common errors that builders make in the efficiency of energy, resources and health. There are far too many green builders out there that are completely missing the mark. There are five mistakes that are being perpetrated, but that you can avoid easily with the right know-how. #5:...... - What's the Purpose of a Concrete Stamp A concrete stamp gives poured concrete the appearance of almost any type of surface you can imagine will from cobblestone to brick to wood, depending on the design of the stamp. A sidewalk, patio or driveway can be poured and made to look like something else with a concrete stamp.......
- M Brace Raised Bed Gardening If you’ve ever wanted try raised beds, either to extend your gardening season or because you have limited garden space, now you can do so without having to spend hours building a bed. The M Brace makes it easy for anyone to create a stunning raised bed for gardening.......
- Taking DIY Disasters into Your Own Hands Watching home improvement television may inspire you to tackle your own home renovation projects, but just as quickly as you found the inspiration to get started, you will find yourself getting over your head. Every year, millions of Americans are tackling their own home remodeling projects, both large and small.......
Online Stores - German Nut Trees Plants, Seeds & Bulbs Gardening & Plants Yard, Garden & Outdoor Living
- Summer Fruit/Flowering Trees Plants, Seeds & Bulbs Gardening & Plants Yard, Garden & Outdoor Living
- Dragon Trellis Fruit/Flowering Trees Plants, Seeds & Bulbs Gardening & Plants Yard, Garden & Outdoor Living Nursery
- Plant Watering Cans Watering Equipment Gardening & Plants Yard, Garden & Outdoor Living Nursery
- Landscape Flower Bulbs, Roots & Corms Plants, Seeds & Bulbs Gardening & Plants Yard, Garden & Outdoor Living Nursery
July 18th, 2010 — Eco-Friendly, Going Green Tips, Home
Tip 1 -
Turn the lights off any time that they are not needed, even if you are just moving from room to room in the course of your day. According to Energy Star, as much as 20 percent of a home's overall energy use comes from its lighting. Using compact fluorescent light bulbs requires as much as 75 percent less energy than standard incandescent light bulbs, but the best way to save energy is to only use your lighting fixtures when you absolutely have to.
Tip 2 -
Wash your clothing in cold water, because washing machines use as much as 90 percent of their energy just heating the water, and higher temperatures mean greater costs to both you and the environment. You can even make your clothes last longer by washing them in cold water, so there is no real reason not to.
Tip 3 -
If you have a gas or electric clothes dryer, you can realize great savings simply by keeping the lint trap cleaned. Tests have shown that this can amount to a savings of $34 per year per dryer, which really adds up.
Tip 4 -
Keep the dryer shut off all together by opting for a clothes tree or clothes line instead. These only tend to cost a few dollars and can save you significant amounts of money when it comes to energy costs throughout the year.
Tip 5 -
Find out if your local utility companies are using green energy. Some local utilities are now using low impact, hydro-electric energy options through solar farms and windmills, so ask if using these power sources will allow for you to realize a savings on your monthly utility bills.
Tip 6 -
If your refrigerator is next to a dishwasher, a vent or a stove, your fridge will have to work harder to keep cool, so by isolating your fridge in another area away from these heat sources, you may be able to reap the benefits through a lower cost energy bill.
Tip 7 -
Forgo the standard, chemical cleaning products and opt instead for a combination between plain water and white vinegar, which is the ultimate cleaning product when it comes to green living. Many companies are now beginning to market environmentally friendly cleaning products as well, should you need something a little more powerful than what vinegar can provide.
Tip 8 -
Choose a better type of grass, like a hardy perennial. There are drought tolerant types of grass that require far less watering and no chemical care, allowing you to have a healthy and beautiful lawn without requiring a lot of water. Don't bother shooing away beneficial critters like insects, birds, toads and frogs as they can actually help your lawn maintain its best.
Tip 9 -
Buy biodegradable pottery for your garden, choosing bamboo, coconut, rice or wheat fibers instead of plastic pottery so that your pottery will biodegrade in the earth instead of ending up in a landfill.
Tip 10 -
Shop green and leave the plastic behind whenever possible. Draperies, shades and other window treatments are available in natural fibers. Furniture can be upholstered using silk, latex, wool and natural robber, or even foam that is made from soybeans. By purchasing natural materials like this, we are eliminating the need for petroleum based products in our home and saving the environment at the same time.
Photo Credits: 1
Originally posted 2009-01-26 05:26:55. Republished by Blog Post Promoter
Related Posts - The Truth of Green Product Claims If you are confused when it comes to green building products and the claims that are being made by their manufacturers, you are not the only one. Navigating the complex world behind green products and the claims that they make is not always easy, but it has become necessary in......
- Quick and Easy Steps to Green Remodeling For a lot of home remodelers, the idea of going green can be absolutely overwhelming. Luckily, there is a wealth of information out there, and just because you are not already implementing these ideas, that does not mean you're too far behind to make some leeway. According to leading remodelers......
- Green Building Materials Green Construction is the practice of building in a way that increases efficiency of the use of materials like energy, water and other materials and resources while reducing the impact on human health and the environment during the process of building through more efficient design, site selection, construction, operation, maintenance......
- Green Home Makeovers that are Easy and Affordable Are you looking to save the environment, but you cannot afford costly options like solar panels? Are you looking for a way to cut down on your energy costs, but are not all together sure about installing wind turbines in your back yard? Don't worry! There are plenty of things......
-
Study Shows Homeowners Using Landscaping to Save Energy and Water In this current day and age, where common activities among people include the tightening of wallets and the fearing of soaring energy bills, almost everyone has had to adopt some substantial practices inside and outside of their own homes. Americans are also incorporating techniques in their landscaping that are allowing......
Online Stores
June 23rd, 2010 — Air/Water, Green Construction, Home
There is a renewed need for mechanical filtration in our homes, as the technology that has become part of the house helps to work more efficiently, leading to a need for maintain air quality in much tighter quarters. This need is very significant, as the American Lung Association has compiled a list of correlations between asthma and lung health issues and the tightening of our homes and introduction of new chemistries to our indoor space. This one-two combo of new and increased pollutants and the smaller enclosures has led to the only possible solution; one must do what is needed to ensure that the air in our homes is fresh and pollutant free.
What is in our air?
It can be hard to fathom, but the air around us contains particulates. Some particulates you can see, for example those within a sunbeam, but most you are unable to see. Those we cannot see are the worst kind, such as VOCs. These threats are the most harmful.
The solution is to design and install a ventilation system. The system should filter air for all areas of the home, and the system must meet ASHREA standard 62-02. This states that the air movement should be 7.5 cubic feet a minute per bedroom plus and additional 0.01 CFM per square foot. A good rule of thumb is to have around 50 CFM for a 1900 square foot, average home. There are two principle design strategies to designing the ventilation system - exhaust and supply systems and air to air heat recover systems.
Exhaust and Supply Systems -
This system's primary mechanism is the placement of an exhaust fan, typically on the second floor. This fan runs quietly either on a low speed continuous or high speed intermittent. This fans placement may allow it to piggy back other parts of the system, but over all the system uses the exhaust fan to take out fresh air for the inlet. The entire system can be modified by removing the exhaust fan and letting the air handler draw in fresh air. The cost of this system is between $400 and $1000, which is heavily dependent on the equipment used.
Air to Air Heat Recovery Systems -
This is a more expensive alternative that recovers some of its energy during its operation. The basic mechanism is that the exhaust passes by the incoming fresh air giving some of its heat (or cold) to the incoming air. These systems also have airflow adjustment to allow the system to work during exhaust. The price for the system can be from $1,800 and $2,500, again heavily dependent on the equipment utilized.
It is important to ensure that your home is free of airborne particles. Choose a high quality filter and a system designed for the needs of you home to ensure that the airborne pollutants are kept to a minimum. This is a necessary element to ensuring the respiratory health of you and your guests.
Photo Credits: 1
Originally posted 2009-01-30 05:41:40. Republished by Blog Post Promoter
Related Posts -
Healthy Green Alternatives Push Asbestos Out of the Home Today's article is written by Joe Lederman, an Awareness Coordinator at the Mesothelioma Cancer Center. When purchasing or remodeling a home or building, there are many variables to consider. Homes which were built prior to 1980 have a strong likelihood of containing asbestos materials. Asbestos is a fibrous mineral that...... - Insulated Vinyl Siding's Green Performance Documented in New Study Recent studies that have been sponsored on the behalf of NYSERDA, insulated vinyl siding has demonstrated that it contributes to energy consumption savings as well as savings in CO2 emissions and energy costs, which means that insulated vinyl siding is capable of outperforming fiber cement when these environmental measures and......
-
Advantages of Crawlers Crawlers can be any type of heavy-duty, outdoor equipment fitted with tracks instead of wheels. The term is most often used to refer to a heavy-duty tractor fitted with tracks but is also used to refer to anything from skid loaders to massive excavators that use a track system instead...... - Understanding the Vapor Barrier The first thing to understand is that there is a difference between vapor barriers and what air barriers are. When properly defined, a vapor barrier alone is not capable of controlling the movement of air, but rather it is responsible for controlling the movement of moisture. Vapor barriers are not......
-
Fork Loader or Forklift Truck A skidsteer loader that is fitted with fork attachments is known as a fork loader. There are a variety of reasons why using a Fork loader might be preferable at any given time than using a forklift truck. First of all, a skidsteer loader is a very adaptable piece of......
Online Stores